HOW TO APPLY PEELABLE PAINT BOOTH PROTECTION
It is no mystery that the presence of overspray and infection in spray booths can create fire dangers,
growth rework, and decrease visibility and brightness. Peelable defensive coatings like Booth Shield®
from CarCanvas offer superior protection and may be applied and removed effortlessly.
When applying for peelable paint booth protection, observe these steps to efficaciously manipulate
overspray and maintain your sales space working — and searching — in peak condition:
Peel Away Old Booth Coatings | Peelable Paint
Before applying peelable booth coatings, it's essential to start with a clean slate. If defensive coatings
were formerly carried out to the walls or floors of your spray sales space, peel off the grimy coating and
roll the dry waste right into a tight ball for disposal. If paper booth protection turned into used, get rid of
it and remove it. If the spray sales space walls have overspray and contamination, cast off it with a
non-ferrous, non-sparking scraper and elbow grease. Dirty consumption and exhaust filters need to
additionally be removed at the moment.
Prep & Coat the Paint Booth Floor
Because concrete is porous, it ought to be sealed with a floor prep product consisting of Booth Shield
Floor Prep. Apply the floor prep coat and permit it to dry. Then follow one uniform coat of the peelable
ground coating. Booth Shield’s strip pable floor coating dries and is ready for normal booth site visitors
in a single hour.
Cover Cure Towers, Signage & Sprinklers
To make sure that expanded curing systems, consisting of AdvanceCure, do not grow to be lined with
the Peelable Paint, cover the nozzles or Blades with tape. Any signage in the paint booth must also be
included. Cover sprinklers with paper luggage for the duration of the spray process.
Apply New Coat to the Spray Booth’s Walls & Doors
Booth Shield peelable booth coatings may be implemented using the conventional or airless spray.
Apply one coat horizontally after which add a second coat vertically over the pinnacle. This removes
sagging and ensures the coating may be peeled off whilst it desires to be removed. You can spray
properly over wall lights, doors, and windows.
Although clear strip pable coatings are to be had, white peelable coatings are recommended for height,
brightness, and visibility. Booth Shield Peelable White strip pable coatings are to be had in both water or
solvent-primarily based formulation and in a variety of volumes to meet your coverage wishes.
After software, go away from the booth walking and permit the wall coating to dry for about 4 hours.
Sweep & Vacuum Any Residue
After eliminating all the vintage coating, vacuum or sweep up dust and dust. Inspect the spray booth
partitions and floor for coatings that had been now not absolutely removed or difficult surfaces caused
by scratches or rust. These areas need to be very well wiped clean and primed with a prep product,
which includes Booth Shield Wall Prep or Floor Prep.
Remove the Coating from Lights & Windows
After the coating dries, score around the lighting fixtures and home windows with a razor blade and peel
off the section of the coating that covers the lights and windows. Then, apply coats of a translucent
coating, including Booth Shield Peelable Translucent, over the lighting and home windows to provide
cohesive protection without inhibiting visibility.
Replace Paint Booth Filters
Install new paint sales space filters to make certain the effective seize of overspray and dust, maintaining
your sales space shiny, white and smooth longer.
Booth Shield peelable coatings will permit you to spray to your shiny, smooth booth for as many as seven
hundred sales space cycles. When it comes time to update the coatings, you will be amazed how tons
easier it is than putting off conventional sales space paper. After the rims are scored, Booth Shield
coatings quickly peel off, saving time for technicians and growing throughput.
Reference: https://www.techforfly.com/2021/09/how-to-apply-peelable-paint-booth.html
Comments
Post a Comment